
FSS
Fully Suppressed 410 Shotgun
The benefits of a Suppressed Shotgun are its is a joy to shoot, quiet and no recoil make it great for shooting with kids as well as for pest control
These are very quiet; ‘Silenced’ is the best description
We will ship Online orders to a Business Address on the Mainfreight Network
They can also be seen and ordered through our approved dealers around the country - see map
Now you can have a fully suppressed shotgun, ideal for use around lifestyle blocks, orchards and stock, without upsetting the neighbours. Great for Personal or Commercial Use
Unlike the 22, which can be suppressed, a suppressed shotgun does not have the very long range and risk of ricochet associated with the 22, however it is well and truly up to the job of pest control.
The great thing about this design is that you can use standard “off the shelf” high velocity ammo, with the gun integrally dropping the velocity to subsonic levels and suppressing the noise to an extremely quiet thud.
NO Special Ammo Required – Uses normal factory ammunition; the barrel is ported to reduce the speed of factory rounds
This is a very quiet shotgun; combined with a efficient suppressor, nice balance and designed to make standard ammunition subsonic make this a ideal for:
- Shooting in Noise Sensitive areas
- Teaching Kids to shoot
- Pest Control
- Shooting in Areas that make the 410 a better choice than a 22
Not only is it quiet it has very little recoil as well
Built on a on a Rossi Montenegro Single shot 410 - Currently ONLY Synthetic Black Stocks
2.2kgs and 990mm long
How do I clean this Shotgun?
For optimal performance and to maintain the barrel in good condition and corrosion free, it is recommended that the inside of the barrel be liberally sprayed with a corrosion inhibitor (CRC or WD40) after each shooting session, such that the liquid flows through the ports into the suppressor assembly.
You should also maintain and check the firing and trigger mechanisms are functioning correctly before you use the firearm
At all times proper and safe firearms handing and procedures should be followed
Does the Suppressor Need Servicing?
In addition to this the entire suppressor assembly should be dismantled, checked and cleaned when you think the noise level has increased to much
This process is quite achievable if the instructions are followed but needs to be completed carefully. This can be completed by the manufacturer for a $150 fee.
Should you wish to do this yourself please contact us for instructions at the time.
We DO NOT recommend you open the suppressor without first contacting us
Warranty
The manufacturer’s liability of this product is limited to the repair or replacement of the product only. In no event shall the manufacturer be liable for consequential or indirect damages to goods, property, equipment or personnel.
The Suppressor is warranted for 2 years.
Nor shall the manufacturer be liable for damages to equipment or personal injury caused by the product being misused, modified, or incorrectly assembled
We will ship Online orders to a Business Address on the Mainfreight Network if there isn't a dealer near you