fbpx

PARD QD Mount

PARD QD Mount

$599.00

Description

Designed for Quick Detach and Return to Zero for your PARD 008 or SA45

These are very quick to move your scope between rifles or reattach it while retaining zero

This makes using the SA45 Thermal Scope a snap as a Handheld and a Rifle scope (Just as we do)

Built in Whangarei using a USA Made ARMS mount for the actual mounting system. Requires a Rail on your rifle

We have 30mm/1 Inch Ring versions as well for your normal scope – See Here

These have been used by us for nearly 10 years without issues in a commercial environment – they are a mount you can trust.

Requires Allen Key 5/8″ (Not Included)

This is what ARMS say about their products

The New MK-II Lever® features a built-in precision adjustment wheel allowing finger tip (no tool) selection to desired tension to fit variations in 1913 Mil-Std Dimensions.  The mounts adjustment wheel comes pre-gauged and locked to the center of the Mil-Std dovetail specs.  The hash marks to the left or right of the adjustment wheels white marked indicator line, represent .002 Quick Detach Throw Lever® Mil-Std 1913 Rail MK-II Lever® mounting attachment.

WHY THE REPEAT ZERO GUARANTEE?

The spring loaded cammed lever pulls in a downward force when the lever is pushed inward which does not disturb the windage (azimuth) normally encountered with thumbnuts, bolts, wrenches, and/or ratchet knobs, which only secure the cross force direction and varying non-repeat tension. Because the Throw Levers pull down instead of across, it means positive controlled attachment not found on any other system. No threads to strip, no cross threading, ratchet wear, over-tightening, crushed or dented rails when using the A.R.M.S.® spring loaded attachment. A.R.M.S.® Throw Levers® will also not freeze or absorb sand and mud, like threaded and ratchet designs.
The unique force of direction and constant repeat tensions guarantee on and off repeatability. The rings snap into the same locked zero aiming position securely each and every time, and once the laser/optic has been zeroed to a quality standard mil-spec dimensioned dovetail rail which is secured to the same weapon.
Easy on and off, no tools required, once the ring caps are secured: The spring loaded feature also acts like a shock absorber which provides a shock reducing barrier to sensitive optical/laser devices for extended service life and cost savings.
All A.R.M.S.® Throw Lever® mounts are designed to fit certified Mil-Std. 1913 Rails, via pre-measured spring loaded tension.  If one of our Throw Lever® mounts is too loose or too tight, the chances are you have an after market rail that is not dimensioned to the Mil-Std. dimensions.
PARD Night Vision, Besdt Value Night Vision Rifle Scope