Hot Item



LabRadar uses Doppler Radar to measure the velocities of your bullets. Labradar is the most precise personal method of measuring velocities available, it provides ballistic data up to 80m to give you the best information on your load



The chronograph era is over – LabRadar is Here

LabRadar uses Doppler Radar to measure the velocities of your bullets. Labradar is the most precise personal method of measuring velocities available, it provides ballistic data up to 80m to give you the best information on your load

Doppler Radar is the most precise method of measuring velocities available. Its accuracy is not dependant on light conditions or being exactly parallel to photo electric sensors resulting in false readings – it leaves your old Chronograph with its single reading for dead

  • No shooting through a small confined area.
  • No dealing with optimal lighting conditions.
  • No stopping the firing line to set up and take down equipment.
  • Easy set up.
  • Place LabRadar beside the shooter, point towards the target and you’re ready to go.
  • Track and obtain true velocities continuously up to 100 yards.


  • Easy set up: Place LabRadar beside the shooter, aim towards the target and you’re ready to go.
  • Uses Continuous Wave Doppler Radar and advanced Digital Signal Processing Technologies.
  • Maximum Velocity, Minimum Velocity, Average Velocity, Standard Deviation and Extreme Spread.
  • Actual velocities at various distances, up to 100 yards.
  • Accurate with subsonic, transonic and supersonic projectiles.
  • Works in any light conditions.
  • Not affected by environmental conditions such as lighting, climate, precipitation and location (indoor/outdoor).
  • Has an accuracy variance of better than 0.1%.
  • No shooting through a small confined window.
  • Records virtually unlimited number of shots and shot series.
  • Works great for rifles, shotguns (currently slugs only), handguns, air rifles, bows and crossbows.
  • Custom software for later PC analysis.
  • Has internal memory and SD card for storing data.
  • Works on 6 AA batteries or from an external USB power pack.
  • Comes with a 1 year warranty.

NZ Defence Force purchases LabRadar

The NZDF has purchased a new ballistic radar system from Canadian firm Infinition, which also manufactures the LabRadar. The LabRadar will form part of a calibration kit which will be issued to frontline units to let them carry out regular calibration of all sniper and anti-materiel rifles at unit level. Read the full article here…

LabRadar is on Applied Ballistics Recommended Product List

Over the years, Applied Ballistics has been involved in the development of or testing of certain products. On this page you will find recommended products based on that testing, and short descriptions of them.

And LabRadar is one of the products that they recommend

Applied Ballistics was founded in 2009 by Bryan Litz.  Since then, the company has grown to include numerous industry experts who develop and support a product line that is second to none in the long range shooting community.

Do you have any videos that show proper setup and operation?

Yes, we have several videos posted on our YouTube.

LabRadar You Tube Channel


Download FAQ

Suppressed Rifles

If you are using lighter calibres with a suppressor, or just have a quiet larger calibre as well; the LabRadar may not always pickup the shot, you can change the position of the muzzle to improve the results or use the Air Gun Trigger which will certainly work – Ask us if you aren’t sure

Padded Carry Case

This customised padded case is constructed of 600 Denier fabric with a waterproof backing. It includes 2 full-length zippers with pull tabs, padded sides, and webbed handles. There is an exterior large bellow pocket for storage of accessories that has a velcro closure and an interior pocket for storage of the user’s manual. There are two Velcro straps on the back side of the case to strap the Bench Mount plate to the case. A shoulder strap is included.

Air Gun Trigger

The Air Gun Trigger Adapter kit is used for guns that do not discharge sufficient muzzle blast to trigger the radar. This adapter should only be used on Air Guns, Rimfire cartridges that have little or no muzzle blast and some suppressors

Bench Mount Tripod

This Bench Mount – Tripod provides the best support for your Labradar if your shooting prone or from a shooting bench. It is adjustable to lay flat or to be used as a standard tripod. The legs extend for extra stability on those windy days.

Features include:

Perfect for Bench Shooting – the Labradar stays stable with collapsed or extended legs.

Great for Prone Shooting– the Labradar can be elevated to optimize beam placement to keep the beam projected on the target and not being disturbed by grass or uneven ground

Removable mounting plate stays attached to your Labradar for a quick connection and easy set up

Height adjust from 7 – 18 inches

Base adjust from 8 – 24 inches

Swivel Ball Mount provides 360 degree movement for perfect alignment